Email:1442365335@qq.com
-
- Commodity name: Axial flow pump
Parameter range
Flow rate Q 4.0 at 40 m³/s
Manometric head H 1 to 13 m
Model description
56GZ-3.7-GP
56 — Nominal diameter of the pump suction inlet, equal to 56 (1400 mm)
GZ continuous-flow axial pump
3.7 - Design manometric head in m
In-line installation with a GP pipe (open-air installation GK)
178GZ-4.78
178 - Nominal diameter of the pump discharge outlet, equal to 178 (4450 mm)
Axial-flow pump GZ
4.78 - Design discharge head: 4.78 m
Type of structureThe axial-flow pump is installed horizontally, in a low position below the water level of the headrace basin, and requires no priming at startup. The pump housing consists of a double cylinder: in larger models, the electric motor and gear reducer are housed in the inner cylinder, while the space between the two cylinders forms the water passage channel. In some cases, for high- and medium‑power pumps, the outer perimeter of the motor and reducer may also be designed directly as a concrete hydraulic channel. From inlet to outlet, this pump features very few pipe bends, connected by short fittings, which reduces head losses and gives the entire installation a relatively high overall efficiency.
Pump rooms are most often located in the basement; accordingly, the transport of components is arranged above the pump, and the entire area can be enclosed, ensuring a clean and well-maintained environment throughout the facility.
Direction of rotation
Pump impeller: ZG310-570/ZG1Cr13Ni1/ZG0Cr13Ni4M0 Pump impeller housing: ZG1Cr13
Pump housing: cast iron / Q235-A
Material of the main parts
Complete supply including the pump, the electric motor, and the inlet and outlet expansion joints.
Full range
Pump, motor, control cabinet, and necessary accessories.
Axial flow pump
WhatsApp/Wechat/Tel:
Email:
Related Products Recommendations
Reliable and efficient pumping solutions for various industrial applications
The TKX(S), LKX(S), and LBX(S) vertical mixed-flow pumps are new products developed by our company in the 1980s, thanks to the importation of advanced technologies from the American company |-R. They are particularly well suited for circulation pumps in large thermal and nuclear power plants, as well as for applications in metallurgy, urban and agricultural wastewater treatment, and industrial and mining projects. They are used for conveying clean water, rainwater, wastewater, and seawater at temperatures not exceeding 55 °C.
HB and HBF pumps are submersible mixed-flow pumps. The HB pump is designed for drainage and irrigation of agricultural land, as well as for industrial pumping; the maximum fluid temperature must not exceed 80 °C. The HBF pump is used for pumping corrosive liquids in the chemical industry; the fluid temperature ranges from −20 °C to 105 °C.
RS‑type pumps are single‑stage, double‑suction, horizontal‑shaft centrifugal pumps with a mid‑section discharge, designed for heating networks. They are suitable for the metallurgical, power‑generation, chemical industries, and heating systems, and are used to convey clean water free of solid particles, as well as other liquids whose physical and chemical properties are similar to those of clean water. The temperature of the conveyed fluid ranges from –20 °C to 150 °C, and the allowable inlet pressure is 0.8 MPa.
PRODUCT SOLUTIONS
Marine Applications
Space-Saving and Seawater-Hardened Pumping for the Global Fleet The marine environment is one of the most hostile on earth. Equipment installed on ocean-going vessels and offshore oil platforms must endure continuous saltwater corrosion and rolling mechanical stress within confined spaces. Primary Applications: Vessel seawater ballast systems, offshore platform fire fighting, marine cooling water intake, and shipyard drydock dewatering. Our Advantage: Engineered with anti-corrosive bronze or duplex interiors and compact vertical space-saving line shafts, our marine-grade pumps deliver high-volume fluid movement while taking up minimal deck or engine room real estate, fully capable of operating under continuous vessel motion.
Power Generation Sector
Power Generation Sector Securing Uninterrupted Utility Flows for Global Power Grids Thermal and gas-fired power plants rely on massive, non-stop water circulation to maintain thermodynamic efficiency and prevent costly shutdowns. Our engineered pumping solutions are built to withstand the rigorous 24/7 operational demands of modern power stations. Primary Applications: Main cooling water circulation, condenser cooling, auxiliary feed-water systems, and screen wash applications. Our Advantage: Our heavy-duty vertical turbine pumps and double-suction split case pumps feature optimized hydraulic profiles that minimize wear from continuous operation, drastically lowering unplanned maintenance intervals.
Mining industry
Securing Continuous Dewatering and Process Flows for Global Mine Operations Open-pit and underground mines rely on reliable, high-volume pumping to remove groundwater and stormwater, transport slurry, and maintain processing circuits. Our engineered pumping solutions are built to withstand abrasive solids, corrosive water, and rigorous 24/7 operational demands. Primary Applications: Mine dewatering, tailings transfer, slurry handling, process water supply, and high-pressure wash applications. Our Advantage: Our heavy-duty slurry pumps and vertical turbine pumps feature wear-resistant materials and optimized hydraulic profiles that minimize erosion from continuous operation, drastically lowering unplanned maintenance intervals.
Water Conservancy Sector
Water Conservancy Sector Massive Hydraulic Capacities for Regional Water Management and Safety Managing macro-water resources requires equipment capable of moving unprecedented volumes of water efficiently, whether for agricultural lifeblood or urgent disaster mitigation. Primary Applications: Regional water diversion projects, large-scale agricultural irrigation networks, flood control drainage stations, and reservoir management. Our Advantage: Our high-flow horizontal split case pumps are engineered with custom-tailored impellers to handle fluctuating water levels and raw water containing suspended solids, delivering maximum dynamic head and volumetric efficiency when nature demands it.
Nuclear Power Sector
Redundant Safety and Uncompromising Precision for Nuclear Infrastructure In nuclear power generation, there is zero room for equipment failure. Pumping systems in the non-nuclear and auxiliary safety loops must perform with absolute certainty to ensure reactor thermal balance and plant safety. Primary Applications: Essential service water systems, auxiliary cooling loops, and emergency fire-protection pump groups. Our Advantage: Engineered with strict structural integrity, detailed material traceability, and non-destructive testing, our custom vertical turbine pumps offer the mechanical redundancy and seismic resistance required to meet the world’s most stringent nuclear quality audits.