PRODUCTS

You witness our steady growth and professional dedication


Oblique-flow pump

The TKX(S), LKX(S), and LBX(S) vertical mixed-flow pumps are new products developed by our company in the 1980s, thanks to the importation of advanced technologies from the American company |-R. They are particularly well suited for circulation pumps in large thermal and nuclear power plants, as well as for applications in metallurgy, urban and agricultural wastewater treatment, and industrial and mining projects. They are used for conveying clean water, rainwater, wastewater, and seawater at temperatures not exceeding 55 °C.

Horizontal oblique-flow pump

HB and HBF pumps are submersible mixed-flow pumps. The HB pump is designed for drainage and irrigation of agricultural land, as well as for industrial pumping; the maximum fluid temperature must not exceed 80 °C. The HBF pump is used for pumping corrosive liquids in the chemical industry; the fluid temperature ranges from −20 °C to 105 °C.

Condensate pump

Vertical multistage condensate pumps constitute a product line developed by our company through the adoption of design and manufacturing technologies from the Japanese firm Hitachi. They are particularly well suited to the requirements of large thermal power plants, with models available for turbo‑generator sets ranging in capacity from 100 to 125 (145), 200, 300, 600, and 1,000 MW. They can also be used as high‑suction‑head pumps for conveying other liquids whose physical and chemical properties are similar to those of clear water. Under standard design conditions, the liquid temperature must not exceed 80 °C; beyond this limit, a special design is required.

Small-sized medium-flow pump CSP

The small- and medium-sized, mid‑opening, double‑suction centrifugal pump of the CSP type represents the fifth generation of high‑performance, energy‑efficient products developed by our company, building on the four preceding generations of mid‑opening pumps—SSA, SAP, and SG—and incorporating advanced technologies from similar equipment, both domestic and international. This product line stands out for its wide range of models, excellent hydraulic performance, innovative design, high efficiency, enhanced reliability, low residual cavitation levels, and reduced maintenance requirements. The design, manufacturing, and quality of this series comply with the GB/T 5656 standard “Technical Requirements for Centrifugal Pumps—Class II,” while its performance indicators meet the requirements of the GB/T 19762 standard “Energy Efficiency Limit Values and Energy‑Saving Evaluation Values for Clear Water Centrifugal Pumps.”

Yuanjiang Pump

The single-stage, single-suction vertical pump of the YJG type is an improved‑structure version of the YJ‑type pump. It is suitable for water supply and wastewater‑discharge projects in large thermal power plants, industrial facilities, and mines, as well as in urban areas and agricultural developments. It is used for conveying clear water free of solid particles or other liquids whose physical and chemical properties are similar to those of clear water; the temperature of the conveyed liquid must not exceed 50 °C.

Horizontal multi-stage condensate pump

The SN‑type horizontal double‑suction, two‑stage centrifugal pump is a new model designed and manufactured by our company, the result of sixty years of experience in pump‑manufacturing technology. This pump series features easy installation, reliable operation, simplified maintenance, and reduced vibration; it is widely suited for discharging condensate water from condensers in thermal power‑generating units rated at 100, 300, 350, 600, 660, and 1,000 MW, and can also be employed in water‑distribution and drainage applications requiring high suction performance and substantial head. The temperature of the conveyed fluid ranges from 0 °C to 80 °C.

Single-stage horizontal condensate pump

The MD series pumps are horizontal, single-suction, multistage, sectional centrifugal pumps. They incorporate a hydraulic design derived from nationally recommended high‑efficiency products, offering advantages such as high efficiency, a broad performance range, safe and stable operation, low noise levels, long service life, and easy installation and maintenance. These units are intended for pumping clear water containing solid particles (abrasive) or other liquids whose physicochemical properties are similar to those of clear water. The allowable inlet pressure is less than 0.6 MPa.

Single-stage horizontal condensate pump

NB and NBA pumps are single-suction, overhung‑shaft centrifugal pumps designed for cooling applications. GN and GNL pumps are two‑stage, single-suction centrifugal pumps suitable for power plants; they are used to discharge condenser condensate and to pump condensate or other liquids whose physical and chemical properties are similar to those of water, in turbo‑generator sets with capacities ranging from 750 to 3,000 kW. The liquid temperature must not exceed 80 °C. The pump inlet pressure must not exceed 0.6 MPa.

IRG hot water pump

The IRG-type hot-water circulation pump is a single-stage, single-suction, suspended‑base centrifugal pump, suitable for circulating hot water in waste‑heat recovery systems or closed circuits, as well as for metallurgical applications, power plants, the chemical industry, and organic heat‑transfer systems. It is designed to handle fluids with temperatures not exceeding 230 °C and operating pressures not exceeding 3 MPa.

Medium‑opening, high‑efficiency SG‑type pump

The high-efficiency, single-stage, double-suction, horizontally split centrifugal pump of the SG type represents the new generation of double-suction, horizontally split pumps, designed and manufactured by our company based on sixty years of experience in pump manufacturing technology. This pump series is characterized by its maturity, reliability, and high efficiency, and it is suitable for a wide range of applications, including the manufacturing industry, urban infrastructure, the chemical industry, the steel industry, mining, power plants, agriculture, hydraulic engineering, and dredging projects. It is intended for pumping clear water free of solid particles, or liquids whose physical and chemical properties are similar to those of water; the temperature of the conveyed fluid ranges from 0 °C to 80 °C, and the maximum allowable inlet pressure is 0.6 MPa.

< 1 > proceed page